Arbormass also supply the range of ATMOS log gasification and pellet boilers. The ATMOS range are popular in Europe as they are no frills boilers that can be ideal for farms and rural businesses with labour that are able to stock the boilers with wood on a daily basis. Huge savings can be made on the purchase of these boilers and of course they are still eligible for the Renewable Heat Incentive.
The boilers are constructed for burning wood on the principle of generator gasifying with the use of a gas exhaust ventilator, which withdraws the combustion gases from the boiler, or leads air into the boiler.
The boiler body is produced as a welded chamber of 3-8 mm steel sheets. They comprise the fuel hopper, which is equipped at the bottom with a heatproof pipe fitting with longitudinal hole for the combustion gases and passage of gases. The burnout part of the multiple chamber furnace under the fuel hopper is equipped with ceramic pipe fittings. There is a vertical combustion gas duct in the back of the boiler body, which is equipped with a heating valve in the upper section. The upper part of the combustion gas duct is fitted with a gas exhaust outlet for connection to a chimney.
The new series of combo boilers ATMOS DC 15EP(L), DC 18SP(L), DC 25SP(L), DC 32SP(L) facilitates the burning of wood on the principle of generator gasification in combination with a burner for pellets, natural gas, or extra LFOs. The boiler enables changing of fuels; we heat by pellets, natural gas, or extra LFOs depending on which burner is built into the boiler. If needed, there is naturally the option to buy a boiler without a burner and select one later or to use a burner from the last boiler.
The boiler proper is constructed as a body of three chambers situated one above another. The two upper chambers serve for the gasification of the wood, as you are familiar with from the classical gasification boilers that we produce as the standard. In the third, lowest chamber, is installed the required burner at the front, inlaid by ceramics to ensure the optimal quality of burning. Both the systems are separated by a water jacket so that they do not interfere with each other and, thanks to that, the boiler achieves high effectiveness when heating by the individual fuels. The combustion gases exhaustion is handled by one outlet and therefore only one flue is needed.
- ADVANTAGES OF ATMOS BOILERS
- Possible combination of the individual types of fuel - fuels changing without modifications in the boiler wood + pellets, wood + natural gas, wood + extra LFOs
- Possible substitution of the individual burners - at any time, it is possible to choose a different medium
- High effectiveness in the individual fuels - for all practical purposes identical as in the special boilers for extra LFOs, natural gas, or pellets (up to 92.3% at the nominal output)
- Cheaper solution - adding the costs for the purchase of two boilers, their installation and smoking, we find that one boiler, though more expensive, is more economical.
- Less built-up area compared to a greater number of boilers
- One chimney and flue
- Ecological operation in all the versions of heating
Would you like to learn more?
Please write an email.
are designed for burning wood and wood briquettes
are designed for burning wood and coal
on the principle of generator gasification with the use of a gas exhaust fan (S), which withdraws the combustion gases from the boiler.
The boiler body, made as a welded chamber of quality 3 to 8 mm steel sheets, comprises:
Our dedicated team of experts are here to provide you with the most up to date nformation on grants and will work closely with you to design and deliver the most cost efective and highly efficient renewable energy solution.
Click here to contact now >
5 Station Close
Telephone: 0845 519 3566
Mobile: 07921 959616
E Mail: firstname.lastname@example.org